Product information sheet: Download PDF

Product information sheet: Download PDF

Fitting destination displaysYour Accurascale Mk.5 Caledonian Sleepers include a choice of two bodyside destination panels. These can be found in the small plastic bags in the packaging of the models. For fitment, we recommend a basic hobby PVA glue. To allow fitment, you'll need a small amount of PVA glue, a toothpick and a set of blunt nose tweezers.Using the toothpick, apply several small blobs of glue on the inner lip of the coach bodyside. You do not need much; four to six blobs should be more than enough.Whilst the glue is still wet, carefully fit the destination board. We suggest fitting one end first (whilst holding the other with tweezers) and then carefully 'hinging' the item into place. Allow to dry and repeat on the other side.

Removing the bodyWe don't generally recommend removing the bodies, but if you need to do so for passenger fitting or detailing, here is the location of the retaining clips. We recommend gently prying the side of the coach with a guitar pick, credit card, or similar, and sliding a card into the clip location in each spot, and the body will cleanly slide away.

Product information sheet: Download PDF

Product information sheets: Siphon G 0.33 - Download PDFSiphon G 0.44 - Download PDFSiphon G 0.59 - Download PDFSiphon G 0.62a - Download PDFSiphon G 0.62b - Download PDFSiphon G 0.62 rebuilt - Download PDFSiphon G Ambulance - Download PDF